Rugged
Mount and cap hardware on the Obsidian 45 is the same as the Obsidian 9, so a tool cut for one services the other — which is why our Obsidian wrenches are marked for both. The 4-in-1 is the one to pick if you tear the can down completely.
Recommended for this host
Four interfaces on one plate: the standard base, the front end cap, the 3-lug mount and the dual taper mount — a full teardown without swapping tools. Engraved for the Obsidian 9/45.
OB945-1 · Custom Suppressor Tools
Use the socket marked Obsidian 9-45 on the reverse face. Tool only — no alignment rods.
Rug002 · Custom Suppressor Tools
Use the socket marked Obsidian 9-45 on the reverse face. The included 9/45 alignment rod holds the baffle stack centred while you thread the can back together.
Rug001 · Custom Suppressor Tools
Two wrench interfaces on one 3.4 inch plate, for the mount and the cap. The pocketable option if you are not doing a full teardown.
OB945-2 · Custom Suppressor Tools
The same two wrench interfaces, supplied with the baffle straightener rod that holds the stack in line while the can is threaded back together.
005 · Custom Suppressor Tools
The same four interfaces — standard base, front end cap, 3-lug mount and dual taper mount — supplied with the baffle straightener rod that holds the stack in line while the can is threaded back together.
OB945-1B · Custom Suppressor Tools
Fitment is listed per host pattern. If your Obsidian 45 has been modified, or you are unsure which cap or mount you have, ask us first — we would rather answer an email than process a return. We reply within 1-2 business days.
Own more than one can? Every suppressor we cut tools for is listed on the fitment index.
