Recommended for this host
Rugged Universal Suppressor Tool
Use the socket marked Obsidian 9-45 on the reverse face. Tool only — no alignment rods.
Rug002 · Custom Suppressor Tools
Rugged
Tools for the Rugged Obsidian 9
Caliber
9mm
6
tools fit this can
The Obsidian 9 and Obsidian 45 share the same mount and cap hardware, so every Obsidian tool we make covers both calibers. Between the dedicated 2-in-1 and 4-in-1 wrenches and the Rugged Universal plate, this is the best-served host in our catalogue.
4-in-1 Suppressor Wrench
Four interfaces on one plate: the standard base, the front end cap, the 3-lug mount and the dual taper mount — a full teardown without swapping tools. Engraved for the Obsidian 9/45.
OB945-1 · Custom Suppressor Tools
Rugged Universal Tool + Baffle Alignment Rods
Use the socket marked Obsidian 9-45 on the reverse face. The included 9/45 alignment rod holds the baffle stack centred while you thread the can back together.
Rug001 · Custom Suppressor Tools
2-in-1 Suppressor Wrench
Two wrench interfaces on one 3.4 inch plate, for the mount and the cap. The pocketable option if you are not doing a full teardown.
OB945-2 · Custom Suppressor Tools
2-in-1 Suppressor Wrench + Baffle Punch
The same two wrench interfaces, supplied with the baffle straightener rod that holds the stack in line while the can is threaded back together.
005 · Custom Suppressor Tools
4-in-1 Suppressor Wrench + Baffle Punch
The same four interfaces — standard base, front end cap, 3-lug mount and dual taper mount — supplied with the baffle straightener rod that holds the stack in line while the can is threaded back together.
OB945-1B · Custom Suppressor Tools
Fitment is listed per host pattern. If your Obsidian 9 has been modified, or you are unsure which cap or mount you have, ask us first — we would rather answer an email than process a return. We reply within 1-2 business days.
Other suppressors we cut tools for
Own more than one can? Every suppressor we cut tools for is listed on the fitment index.